- 4 analog channels; input and output are connected via BNC
connectors
- Measuring range +/-5 V with overload indication for each
channel
- Resolution 12 Bit, simultaneous sampling of all channels
- Input impedance 100 KOhm, SNR 72 dB
- Over voltage protection +40 V
- Total sampling rate 96 kHz, distributed to selected number of
channels ( see table )
- 8-pole lowpass Butterworth filter for input and output,
avoiding Aliasing effects and smoothing the output signals; damping in locking area 48
dB/Octave
- Analog output impedance 2 Ohme, max. 10 mA, +/-5V
- Programmable for 2 - 4 channel mode
- Signal bandwidth max. in 2 channel mode 0 ... 16 kHz (-3dB)
- Serial Interface, suitable for direct transmission even over
long cables or for RF- or IR-transmission
- PC Interface plug-in board for all IBM comp. PCs (Option)
- Digital pulse input (TTL), that means pulses from 0 ... 40 kHz
can be recorded and reproduced.
- Date and time recording (year- month - day - hour - minute -
second)
- Tape length counter for absolute time, programming time,
remaining record time.
- Automatic or manual setting of test number
- Fast search run in both directions searching the test number
- Remote control unit with bargraph display, Voice channel and
overload indication (option)
- Voice channel with external microphone and built-in
loudspeaker, signal bandwidth 60 ... 2800 Hz.
- Recording time 3 hours with a DT180 cassette
- Storing capacity approximate, 2.4 Giga Byte with a DT180
cassette Reproducible accuracy between record and replay at 0 Hz +0,1 %
- Phase error between channels at same frequency <1°.
- Error correction system Double Encoded Reed Solomon Code.
- Bit error rate better 10-10
- Recording format Helical Scan R-DAT
- Illuminated display with following indications: date/time -
program ie. test number - tape length counter for absolute time - program time - remaining
record time - indications for functions like record -forward - reverse - tape loaded etc.
- Additional indications like battery level - error condensing
water
- Functional buttons on tape deck: FORWARD - REVERSE - PLAY -
RECORD -STOP - PAUSE - HOLD
- Remote controllable with TTL-level for START/REC - STOP or/and
event controllable with 1 event for blocs of 1 min
- Power supply DC 10 ... 32 V, battery (Option) or mains 220 V
+/-10 % AC (Option) 110V AC (Option)
- Power requirement approximate 10 Watt
- Environmental conditions:
Operating temperature range -5 C° to + 45 °C
Storage temperature range -20 °C to + 60 °C
Relative humidity 20 ... 80 % non condensing
Vibration 5g Mil. Standard 810 C, Curve C
Shock 10g in all directions
Size 157 x 90 x 65 mm without shock absorber
Weight 1.3 kg without shock absorber
- 16 analog channels; input and output are connected
via BNC connectors
- Measuring range ~5 V with overload indication for each channel
- Resolution 12 Bit, simultaneous sampling of all channels
- Input impedance 100 KOhm, SNR 72 dB
- Over voltage protection +40 V
- Total sampling rate 96 kHz, distributed to selected number of
channels ( see table )
- 8-pole lowpass Butterworth filter for input and output,
avoiding Aliasing effects and smoothing the output signals; damping in locking area 48
dB/Octave
- Analog output impedance 2 Ohme, max. 10 mA, +/-5V
- Programmable for 2 - 4 - 8 - 16 channel mode
- Signal bandwidth max. in 2 channel mode 0 ... 16 kHz (-3dB)
- Serial Interface, suitable for direct transmission even over
long cables or for RF- or IR-transmission
- PC Interface plug-in board for all IBM comp. PCs (Option)
- Digital pulse input (TTL), that means pulses from 0 ... 20 kHz
can be recorded and reproduced.
- Date and time recording (year- month - day - hour - minute -
second)
- Tape length counter for absolute time, programming time,
remaining record time.
- Automatic or manual setting of test number
- Fast search run in both directions searching the test number
- Remote control unit with bargraph display, Voice channel and
overload indication (option)
- Voice channel with external microphone and built-in
loudspeaker, signal bandwidth 60 ... 2800 Hz.
- Recording time 3 hours with a DT180 cassette
- Storing capacity approximate, 2.4 Giga Byte with a DT180
cassette Reproducible accuracy between record and replay at 0 Hz +0,1 %
- Phase error between channels at same frequency <1°.
- Error correction system Double Encoded Reed Solomon Code.
- Bit error rate better 10-10
- Recording format Helical Scan R-DAT
- Illuminated display with following indications: date/time -
program i.e. test number - tape length counter for absolute time - program time -
remaining record time - indications for functions like record -forward - reverse - tape
loaded etc.
- Additional indications like battery level - error condensing
water
- Functional buttons on tape deck: FORWARD - REVERSE - PLAY -
RECORD -STOP - PAUSE - HOLD
- Remote controllable with TTL-level for START/REC - STOP or/and
event controllable with 1 event for blocs of 1 min
- Power supply DC 10 ... 32 V, battery (Option) or mains 220 V
+/-10 % AC (Option) 110V AC (Option)
- Power requirement approximate 10 Watt
- Environmental conditions:
Operating temperature range -5 C° to + 45 °C
Storage temperature range -20 °C to + 60 °C
Relative humidity 20 ... 80 % non condensing
Vibration 5g Mil. Standard 810 C, Curve C
Shock 10g in all directions
Size 160 x 90 x 90 mm without shock absorber
Weight 1.5 kg without shock absorber
|
