| Telemetry Systems | |
|
|
CT8
New
( optional 16 channels ) Compact Telemetry System with 8 channels, direct Sensor connection · 8 channels, 12 bit resolution, simultaneous sampling of all channels · Anti aliasing filters · Direct sensor connection for STG, Thermo couples K or high level inputs · +/- 5V analogue output at the receiver side, optional dig. output for PC interface · Distance up to 500m between transmitter and receiver · Static acceleration up to 100 g in all directions · Signal bandwidth 8 x 0-95 Hz with 40kbit transmitter, 8 x 0-750 Hz with 320kbit transmitter |
|
|
CT2-Mini
New Small Telemetry System with 2 channels, direct Sensor connection · 2 channels, 12 bit resolution, simultaneous sampling of all channels · Anti aliasing filters · Direct sensor connection for STG, Thermo couples K or high level inputs · +/- 5V analogue output at the receiver side, optional dig. output for PC interface · Distance up to 500m between transmitter and receiver · Static acceleration up to 100 g in all directions · Signal bandwidth 2 x 0-375Hz with 40kbit transmitter |
|
|
CT4-Wheel
New
(
optional 8 channels ) 4 (8) Channel wheel telemetry system for connection with strain gages, force, temperature and vibration sensors as well as high level input +/-5 or +/-10Volts. · 4 different carrier frequencies (433.3, 433.7, 434.1 or 434.5 MHz) enable measurements at 4 Wheels for one car. · A mixed installation of different signal conditioning modules possible. · Universal mounting adapter enables a fast and exactly montage on different kind of wheels. · The transmitting system is dust and water protected (IP65). |
|
|
CT8-Rotate
New
Telemetry system for rotating Applications · Direct sensor connection for STG, TH K, ICP and High level inputs (+/-5V or +/-10V) · Signal bandwidth 8 x 0...95Hz · Integrated Battery (Akku) for up to 6 hours operating time · Digital transmitting in 4 different carrier frequencies (433.3, 433.7, 434.1 or 434.5 MHz) enables up to 4 CT8-Rotate telemetry system can work parallel at the same time. · Waterproofed housing (IP65) |
|
|
MT32
New
Mini Telemetry System up to 32 channels, direct Sensor connection · 12 bit resolution, simultaneous sampling of all channels · Anti aliasing filters · Direct sensor connection for STG, Thermo couples K and ICP sensors · +/- 5V analogue output at the receiver side, optional dig. output for PC interface · Different transfer possibilities like IR- or RF- transmission for short and long distance · Small module design to solve a lot of different applications · Powering transmitting side via battery or inductive |
|
|
MT1-PCM New
New!! Digital one channel radio telemetry system for strain gage applications on rotating shafts “Controlled Gain and AZ at receiver side” Signal bandwidth up to 600Hz (-3dB) Distance <-> transmitting to receiving antenna 1-10 meter Powering transmitting side: 6V Litium battery |
|
|
TEL1-PCM New
New!! Digital one channel telemetry system for strain gage applications on rotating shafts “Controlled Gain and AZ at receiver side” Signal bandwidth up to 1200Hz (-3dB) Distance <-> transmitting coil to receiving head 20 mm (Optional 40mm) Powering transmitting side : Inductive |
|
|
TEL1-FM Analoge one channel telemetry system for strain gage applications on rotating shafts Signal bandwidth up to 10000Hz (-3dB) Powering transmitting side: 9-12V Litium battery |
|
TEL
32/16/8 Telemetry Digital telemetry system for 32 channels Fixed Signal bandwidth 32x 800Hz / channel with 2,45 GHz Transmitter - 1,28 Mbit/s or Fixed Signal bandwidth 32x 200Hz / channel with 433 MHz Transmitter - 320 kbit/s or Fixed Signal bandwidth 32x 25Hz / channel with 433 GHz Transmitter - 40 kbit/s Digital telemetry system
for 16 channels Digital
telemetry system for 8 channels |
|
|
TEL1/40k
TTL 1 channel TTL telemetry to transmit from 40 TTL pulses/s up to TTL 40000 pulses/s |
